Safety Solenoid Valves

General Details
Normally open/closed ELEKTROGAS safety solenoid valves with manual reset. The closing/opening function is
electrically activated.

This type of device connected to one or more methane gas detectors and/or carbon monoxide
detectors, is suitable for performing locking operations on the gas line.

An incorporated fine mesh filter protects the valve seat and disc as well as downstream components
and prevents dirty contamination (except brass models).

All components are designed to withstand any mechanical, chemical and thermal condition occuring during typical service.

Efective impregnation and surface treatments have been used to improve mechanical sturdiness, sealing and
resistance to corrosion of the components.

The ELEKTROGAS valves are 100% tested by computerized testing machineries and are fully warranted.


Technical Info

Connections :
Gas threaded ISO 7/1 from Rp3/8 to Rp2 ½
Flanged PN16 – ISO 7005 from DN40 to DN300
Voltage rating:
230 VAC 50/60 Hz
110 VAC 50/60 Hz
24 VAC; 24 VDC
12 VDC
Voltage tolerance: -15% / +10%
Working temperature: -20°C/+60°C
Max. operating pressure: 600 mbar (60 kPa)
6 bar (600 kPa)
Closing time: < 1 sec.
Filter (except brass models): 600 μm, metal mesh
Protection grade: IP 54 (EN 60529)
Cable gland: PG 9
Coil winding insulation: Clasa H (200°C)
Coil thermal resistance: Clasa F (155°C)
Materials in contact with gas: Aluminum alloy, Brass,
Stainless steel, Plated steel, Anaerobic adhesive,
Nitrile rubber (NRB), Polytetrafluoroethylene (PTFE)


Order Enquiry

Contact form description text

  • 9 + 12 =