WIRELESS METHANE GAS DETECTION AND PROTECTION SYSTEM

Prefer AirMesh contains wireless methane gas detector and ELEKTROGAS normal-open solenoid valve with manual reset that operates at 12V voltage.

General information
Specifications
User manual
Contact

SECURE - 128/256 bit AES Banking encryption Standard

DIGITALLY CALIBRATED - individual alarm threshold setting at preset gas concentrations

CONFIGURABLE - via Primatech AirMesh Config App

REDUNDANT PROTECTION - Mesh Technology - NSPOF No Single point of failure

FLEXIBLE - the components of the network can be relocated

NO WIRES, NO HOLES IN THE WALLS - detectors are applied directly to the wall and communicate wirelessly

SCALABLE - the system can be expanded with components from the AirMesh range

SAFE RADIO EMISSIONS - system according to RED 2014/53/EU directive

DETECTOR TECHNICAL SPECIFICATIONS

Sensor: Semiconductor

Supply voltage. 230V AC (-10% +10%) 50/60 Hz

Absorbed current: 17 mA

Gas detected: Methane gas

Sensitivity: 3% - 20% LEL

Alarm threshold: 9% LEL

Initial stabilization time: 2 min 30 sec

Indicators:

Green LED: Power supply

Bicolor LED:

Red: Alarm

Yellow: Fault

intermittent: standby

“R” green LED: communication

Red "B" LED: Low battery

Red LED "A": Solenoid valve closed

BUZZER: Audible alarm - min. 85 dB at 1m

Sensor life: 5 years

Working temperature: -10°C ÷ +40°C

Storage temperature: -20°C ÷ +50°C

Humidity (non-condensing): 20% - 90% RH

Degree of protection: IP42

Housing material: ABS V0

Colour: White

Dimensions: 93mm x 75mm x 38mm (L x I x h)

Weight: 300g

WIRELESS MODULE TECHNICAL SPECIFICATIONS

Power supply: 2 x AA, lithium batteries

Frequency: ISM 2.4 GHz

Emission power: + 8 dBm

Reception sensitivity: -103 dBm

Antenna type: Chip antenna

Encryption: 128/256 bit AES

Maximum distance: 1200 m outside*; 60 m inside*

Humidity (non-condensing): 20% TO 90% RH

Degree of protection: IP42

Case material: PC V0

Colour: Black/transparent

Dimensions: 100 mm x 55 mm x 60 mm (L x I x h)

Weight: 110g

* in a straight line, without obstacles and interference

SOLENOID VALVE TECHNICAL SPECIFICATIONS

Type: Normally open with manual reset

Solenoid valve model: ELEKTROGAS EVRMNA

Working pressure: 600 mbar

Supply voltage: 12 Vcc

Connection: 3/4", 1"

Material: Brass

This detector can be connected to a solenoid valve operating at 12V voltage.