Certified quality – Kitemark certified detector, awarded by the British standards institution, to BS EN 50194 -1:2009
Simple design – nice look, easy to integrate into a living space
Dedicated – the detector works with the aim of detecting accidental methane gas leaks at levels much lower than the lower explosion limit
Double alarm – in alarm condition provides a visual signal (red LED) and an acoustic signal (buzzer)
Remote control – provides an output signal for the control of a solenoid valve that cuts off the methane gas supply
Configurable – built to allow the installation of a single detector on the solenoid valve or multiple detectors can be installed on the same solenoid valve
Self-diagnosis – it is a self-diagnostic system to check the detector for proper functioning. The yellow LED lit continuously or pulse, synchronized with the buzzer, indicates a malfunction of the detector
Test/Reset – equipped with the test/Reset button with dual function: Periodic testing of detector operation and alarm interruption when the detector alarms.
Sensor: SnO2 Semiconductor
Supply voltage: 230V AC (-15%, +10%) 50/60Hz
Power consumption: 3VA
Gas detected: Methane
Alarm range: 3% – 20% LIE
Alarm threshold: 9% LIE
Initial stabilization time: 2 min 30 sec
Sensor life: 5 years
Relay contact ratings:
8(2)A @ 250V AC SPDT
3A @ 250V AC SPST (OPTIONAL)
Working temperature: -10°C ÷ +40°C
Storage temperature: -20°C ÷ +50°C
Humidity (non-condensing): 20% – 90% RH
Degree of protection: IP 42
Housing: Material: ABS V0
Colour: White
Dimensions: 115 x 75 x 43 mm (W x W x h)
Weight: 300g
Indicators:
Green LED: Power supply
Red LED: Visual alarm
Yellow LED:
continuous – failure
flashing at 10 sec – standby
BUZZER: Audible alarm – min. 85 dB at 1m