Certified quality – Kitemark certified detector, awarded by the British standards institution to BS EN 50291-1:2018 standard
Simple design – nice look, easy to integrate into a living space
Advanced technology – contains electrochemical sensor designed to accurately measure low levels of carbon monoxide
Dedicated – provides an alarm signal when it detects in your home a concentration of carbon monoxide much lower than a level dangerous to everyone’s health
Double alarm – in alarm condition provides a visual signal (red LED) and an acoustic signal (buzzer)
Remote control – provides an output signal for the control of a remote device, which can be a solenoid valve for cutting off the methane gas supply, a ventilation fan or a remote warning buzzer
Make a difference – resistant to false alarms caused by contaminants in your home
Self-diagnosis – consists of a self-diagnosis system to check the proper functioning of the detector. The yellow LED continuously lit or pulse synchronized with the buzzer indicates a malfunction of the detector
Test – equipped with the test button for periodic testing of detector operation.
Sensor: Electrochemical
Supply voltage: 230V AC (-15%, +10%) 50/60Hz
Power consumption: 0.7W
Gas detected: Carbon monoxide
Alarm levels:
50 ppm between 60 min – 90 min.
100 ppm between 10 min – 40 min.
300 ppm between 0 min – 3 min.
Initial stabilization time: 2 min 20 sec
Sensor life: 7 years
Relay contact ratings:
8(2)A @ 250V AC SPDT OR
3A @ 250V AC SPST (OPTIONAL)
Working temperature: -10°C ÷ +40°C
Storage temperature: -20°C ÷ +50°C
Humidity (non-condensing): 20% – 90% RH
Degree of protection: IP 42
Housing material: ABS V0
Colour: White
Dimensions: 115 x 75 x 43 mm (W x W x h)
Weight: 300g
Indicators:
Green LED: Power supply
Red LED: Visual alarm
Yellow LED: Continuous – flashing fault at 20 sec – standby
BUZZER: Audible alarm – min. 85 dB at 1m